上海11选5开奖结果

您好,欢迎来到固浪建材有限公司官方网站!

公司简介 | 联系我们

QUANGUOZIXUNFUWUREXIAN:

400-843-6198

栏目导航
联系我们
电话:400-843-6198
传真:
邮箱:1919860518@qq.com
地址:佛山南海区里水石荣工业区
当前位置: > 新闻资讯 > 常见问题解答 >
教您正确使用瓷砖胶的方法、固浪瓷砖胶
浏览: 发布日期:2019-06-11

 

教您正确使用瓷砖胶-固浪强力瓷砖胶

随着社会的发展,瓷砖胶代替了水泥砂浆,但很多人不知道怎么使用瓷砖胶,现在我们就来说说如何使用瓷砖胶,首选固浪瓷砖胶。
With the development of society, tile adhesive has replaced cement mortar, but many people do not know how to use tile adhesive. Now let's talk about how to use tile adhesive, the preferred cement tile adhesive.

1. 所有基面应坚实,干燥,清洁,不晃动,无油污,蜡渍,混凝土养护和其他松散物.

2. 清楚混泥土表面的残余物,特别是倾斜的混泥土平板上所残留的脱摸挤.

3. 干燥的环境下,施工前必须先润湿基面.

4. 施工现场只需按要求加水,使用电动搅拌机将水和瓷砖胶搅拌成均匀的膏状,放置5-10分钟,再次搅拌均匀即可. 搅拌好瓷砖胶应注意防晒避风.

5. 如果瓷砖和石材勾缝较深或转较大,较重,则应该采取工作面和瓷砖背面同时涂布瓷砖胶泥的方法进行施工.

       1. All base surfaces should be firm, dry, clean, not slosh, free of oil, wax, concrete and other loose materials.
 
       2. Clear the residue on the surface of the concrete, especially the squeezing of the sloping concrete slab.
 
       3. In a dry environment, the base surface must be wetted before application.
 
       4. At the construction site, just add water as required. Use an electric mixer to stir the water and tile glue into a uniform paste. Leave it for 5-10 minutes and mix it again. Stir the tile                     adhesive carefully.
 
       5. If the joint between the tile and the stone is deeper or larger, and heavier, the construction surface and the back of the tile should be coated with the tile cement at the same time.

 

     注意事项:

    施工温度最好为5-40度,在雨天施工时,一定要做好遮蔽防护措施,并且要确保在贴砖后的24小时内,施工区域不被雨水淋湿
        The construction temperature is preferably 5-40 degrees. When constructing in rainy days, it is necessary to make shielding protection measures, and ensure that the              construction area is not wet by rain within 24 hours after tiling.

 

全国免费服务热线:400-843-6198

lezhipos.com

  • 上一篇:室内工程瓷砖粘贴的技巧-固浪瓷砖胶
  • 下一篇:没有了
  • 全国服务热线:
    400-843-6198

    Copyright All Rights Reserved
    电话:400-843-6198传真:
    地址:佛山南海区里水石荣工业区
    技术支持: